July 14, 201510 yr Author Do these go right over the stock bar ends?well you have to take the bar end off and use a home made spacer to push them out a bit, not hard just need to find the right parts to make it work. I had a spacer in my garage that I used, you only need it for the throttle side, I don't think I needed to do anything on the clutch side. 2015 fz-07 akrapovic exhaust 2015 ktm 500 xc-w dirt/supermoto tire and wheels
July 14, 201510 yr Author Ordered a pair today; 2 left. Thanks for the recommendation. good deal! I love them! 2015 fz-07 akrapovic exhaust 2015 ktm 500 xc-w dirt/supermoto tire and wheels
July 14, 201510 yr Do these go right over the stock bar ends?well you have to take the bar end off and use a home made spacer to push them out a bit, not hard just need to find the right parts to make it work. I had a spacer in my garage that I used, you only need it for the throttle side, I don't think I needed to do anything on the clutch side.Good looking out R6realtor! I ordered a pair. I'm sure I can put something together to make it work.
July 14, 201510 yr Author No problem! its really easy, you will see what I mean when you go to tighten the throttle side up, it needs to be thin enough to fit inside the throttle tube but hit the handle bar yet wide enough to stop the mirror from hitting the grip so you don't twist the throttle and it stay there like auto cruise control lol. SO think of it as donut between the handle bar end and the bar end that mirror will go on but a super thin donut...it will all make sense when you go to install. 2015 fz-07 akrapovic exhaust 2015 ktm 500 xc-w dirt/supermoto tire and wheels
July 14, 201510 yr Author That looks fantastic! - Paulie Thanks man, appreciate it! 2015 fz-07 akrapovic exhaust 2015 ktm 500 xc-w dirt/supermoto tire and wheels
July 24, 20159 yr I see what you mean about the spacer. Glad I started on the throttle side because I quickly scraped the project for the night. I'll head out to the hardware store today and see if I can find some washers to fit in-between.
December 1, 20159 yr Did you use a plug of some kind to fill the screw hole that was left after removing the stock mirrors? Crush your enemies. See them driven before you. Hear the lamentations of their women. Fuss Life.
December 1, 20159 yr Author Did you use a plug of some kind to fill the screw hole that was left after removing the stock mirrors? yes, just rubber plugs from ace hardware 2015 fz-07 akrapovic exhaust 2015 ktm 500 xc-w dirt/supermoto tire and wheels
December 2, 20159 yr How have de mirrors been holding up? Still good after six months and rainy rides? Could you give us your "long" term review? Thanks!
February 19, 20169 yr I haven't had a chance to ride with them yet but I love the way they look, getting rid of the stock mirrors clean the front end up so much, looks extra mean now!! haha I just put the crg atrow mirrors on. I love them. Do you know if they make a plug or something to replace the hole the stock mirrors leave? Very minor detail but it bugs the crap out of me.
February 19, 20169 yr boots If you take the nuts for the mirrors to ACE (I think they were metric 10 x 1.25) they can get you the bolts you need to plug those holes, the right side being a r.h. thread of course. Good luck! The mirrors look nice! Beemer
February 19, 20169 yr Global Moderator boots If you take the nuts for the mirrors to ACE (I think they were metric 10 x 1.25) they can get you the bolts you need to plug those holes, the right side being a r.h. thread of course. Good luck! The mirrors look nice! reverse thread and yes m10x1.25 ATGATT... ATTATT, two acronyms I live by.
February 19, 20169 yr The same vendor sells these crg arrow knockoffs. http://www.ebay.com/itm/7-8-Motorcycle-Rear-View-Black-blue-Mirrors-Side-Handle-Bar-End-Oval-Plastic-/252226094373 '15 FZ-09 Cadmium Yellow '15 White Fz-07 - Sold
February 26, 20169 yr What I did was took the bolt I wanted to buy a plug for, and eye ball it at the store.
February 26, 20169 yr *EDIT: These are not the right ones for the handle bars mirror plugs.* Pepboys link: https://www.pepboys.com/product/details/892427/00065 Dorman - AutoGrade - Carded Panel Trim Retainer-Interior-GM/Chrysler/Ford Part # 799-135 SKU: 892427
February 26, 20169 yr looking good add that to my buy after lent, cause i have up buying mods for the bike for lent.
February 27, 20169 yr I don't think those are the same ones. They might fit for the rear peg removal but they're loose in the mirror holes.
Archived
This topic is now archived and is closed to further replies.