maz20 Posted August 28, 2018 Share Posted August 28, 2018 Hi, my two front master cylinder bolts (part #5VS-2589H-00-00) are both stripped and will need to be extracted using those "screw extractor" bits : / No dealers in my area have this part in stock, but the service manual says it's just a standard M4 bolt (which local hardware stores have plenty of). It doesn't, however, specify the "length". While I could extract one of the screws and measure the length myself, I can't actually put it back and ride with it (I'm not gonna ride with a screw extractor bit sticking out of a front master cylinder screw), and don't want to ride around without a front master cylinder screw properly screwed in! Does anyone happen to know what the length of that screw (part #5VS-2589H-00-00) is? M4 only tells me the pitch/diameter, but M4 screws come in all sorts of lengths!! Link to comment Share on other sites More sharing options...
elmo Posted August 28, 2018 Share Posted August 28, 2018 15mm Link to comment Share on other sites More sharing options...
maz20 Posted August 29, 2018 Author Share Posted August 29, 2018 Thanks!!! I was able to get these at a local hardware store : ) The 15mm M4's fit perfectly! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.