Shyan Posted July 12, 2021 Share Posted July 12, 2021 Wonder is there any differences on the MT07 2021 fork or brake caliper? Link to comment Share on other sites More sharing options...
stickshift Posted July 12, 2021 Share Posted July 12, 2021 My guess would be different fork lowers, same calipers. The parts diagram is not particularly helpful, as the parts for each model iteration starts with a different prefix. Get out the measuring tape! Link to comment Share on other sites More sharing options...
Shyan Posted July 12, 2021 Author Share Posted July 12, 2021 11 minutes ago, stickshift said: My guess would be different fork lowers, same calipers. The parts diagram is not particularly helpful, as the parts for each model iteration starts with a different prefix. Get out the measuring tape! Yes.. The part diagram does not help at all.. 1 Link to comment Share on other sites More sharing options...
Mad Posted July 12, 2021 Share Posted July 12, 2021 I believe the fork’s lower must be changed but larger disks are heavier, so .. no problem until you MUST use larger disks and in that case I will go with radial adapters or with the r1 disk conversion kit Link to comment Share on other sites More sharing options...
Shyan Posted July 12, 2021 Author Share Posted July 12, 2021 2 hours ago, Mad said: I believe the fork’s lower must be changed but larger disks are heavier, so .. no problem until you MUST use larger disks and in that case I will go with radial adapters or with the r1 disk conversion kit Oh..are you referring the 320mm disc conversion kit from Extreme Creations? Yeah that one not bad except the bracket are little bit expensive 1 Link to comment Share on other sites More sharing options...
Mad Posted July 13, 2021 Share Posted July 13, 2021 I would leave the disk size alone, the added mass it’s a big no ( if not needed). there are a lot of choices to improve braking performance and are cheaper too 1 Link to comment Share on other sites More sharing options...
XSR700Scrambler Posted July 14, 2021 Share Posted July 14, 2021 Magura HC-1 radial master = $240 HUGE improvement for the $$$ I added braided lines as well $150 $390 later the brake feel is absolutely transformed. 1 Link to comment Share on other sites More sharing options...
Jerzee Posted July 14, 2021 Share Posted July 14, 2021 Is it a direct swap out, ie. HC-1 for OEM, or are there other 'bits' required, like a brake light switch? Thanks. Link to comment Share on other sites More sharing options...
XSR700Scrambler Posted July 14, 2021 Share Posted July 14, 2021 Magura HC-1 radial master has a brake light switch that you connect to your existing wiring. It's a small-generic connector, you have to splice-adapt to your bikes plug. 1 Link to comment Share on other sites More sharing options...
Jerzee Posted July 15, 2021 Share Posted July 15, 2021 Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now