mrfat17 Posted June 30, 2017 Share Posted June 30, 2017 Hi all, I have shogun frame sliders that i am about to install. Do I need a rear tire stand to do this? Or does the kickstand + spotter provide enough support? thanks, mrfat17 Link to comment Share on other sites More sharing options...
ducttapewd40 Posted June 30, 2017 Share Posted June 30, 2017 Hi all, I have shogun frame sliders that i am about to install. Do I need a rear tire stand to do this? Or does the kickstand + spotter provide enough support? thanks, mrfat17 Probably don't even need the spotter Link to comment Share on other sites More sharing options...
jbone Posted July 1, 2017 Share Posted July 1, 2017 This video shows what you're trying to do. Only things I would do different are use a breaker bar to loosen and make sure to use a torque wrench when tightening. You don't need a rear stand or a spotter - especially if you have a breaker bar. Link to comment Share on other sites More sharing options...
magdfarid Posted September 21, 2017 Share Posted September 21, 2017 No stands needed, I explained the process in this video Installing frame and handlebar sliders - YAMAHA FZ07 Link to comment Share on other sites More sharing options...
TheWulf Posted September 21, 2017 Share Posted September 21, 2017 I did my Woodcrafts with just the kickstand. Just use a breaker bar and apply leverage at the correct angle, brace the joint on the breaker bar with your other hand, and you should be fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.