jmacas87 Posted December 22, 2016 Share Posted December 22, 2016 Here's a quick review of the venom front triple tree stand with the [HASH]2 pin kit. I know others use this stand, but to make it easy for future readers I wanted to re-post here so people know that it does indeed work. (With the proper pin) The [HASH]2 pin kit includes a 21mm pin that can be used with the FZ07. A pitbull [HASH]33 pin can also be used, but I found this stand via ebay with the [HASH]2 pin kit included for under $70 with 2 day shipping. Quick background, I've used (but not owned) pitbull stands, cheapy harbor freight rear stand, and the trackside rear stand which I currently own. I'm currently using this venom stand with the trackside rear stand. Comes packaged pretty good, here's a shot of it before assembly. Assembly is easy, I didn't use instructions or anything as it's pretty obvious where things should go. Construction is solid. Pit bull stands obviously offer top shelf construction, but these venom stands are no slouch and I have no worries about its structural integrity. Here's the 21mm pin ([HASH]2 pin kit) Here's the clearance under the headlight bracket when mounted. It's JUST fits, but fits nonetheless and it's solid. Overall I'm very happy with the stand, it's use and construction. It's sturdy when mounted in conjunction with a solid rear stand. Again, getting pin kit [HASH]2 or the pitbull [HASH]33 will fit the opening for our lower triple trees. Link to comment Share on other sites More sharing options...
reboot Posted December 22, 2016 Share Posted December 22, 2016 Nice review. I have the same setup with the rear venom stand (including pin and bike color!) and my bike has been sitting on it for a few months with no issues while I work on it. For the price its hard to beat! Link to comment Share on other sites More sharing options...
Cruizin Posted February 2, 2017 Share Posted February 2, 2017 Here's a quick review of the venom front triple tree stand with the [HASH]2 pin kit. I know others use this stand, but to make it easy for future readers I wanted to re-post here so people know that it does indeed work. (With the proper pin) The [HASH]2 pin kit includes a 21mm pin that can be used with the FZ07. A pitbull [HASH]33 pin can also be used, but I found this stand via ebay with the [HASH]2 pin kit included for under $70 with 2 day shipping. Quick background, I've used (but not owned) pitbull stands, cheapy harbor freight rear stand, and the trackside rear stand which I currently own. I'm currently using this venom stand with the trackside rear stand. Comes packaged pretty good, here's a shot of it before assembly. Assembly is easy, I didn't use instructions or anything as it's pretty obvious where things should go. Construction is solid. Pit bull stands obviously offer top shelf construction, but these venom stands are no slouch and I have no worries about its structural integrity. Here's the 21mm pin ([HASH]2 pin kit) Here's the clearance under the headlight bracket when mounted. It's JUST fits, but fits nonetheless and it's solid. Overall I'm very happy with the stand, it's use and construction. It's sturdy when mounted in conjunction with a solid rear stand. Again, getting pin kit [HASH]2 or the pitbull [HASH]33 will fit the opening for our lower triple trees. Awesome review man! Yamaha MT-10 ForumYamaha Tracer 900 Forum Yamaha Ténéré 700 Forum Link to comment Share on other sites More sharing options...
Cruizin Posted February 2, 2017 Share Posted February 2, 2017 Here's a quick review of the venom front triple tree stand with the [HASH]2 pin kit. I know others use this stand, but to make it easy for future readers I wanted to re-post here so people know that it does indeed work. (With the proper pin) The [HASH]2 pin kit includes a 21mm pin that can be used with the FZ07. A pitbull [HASH]33 pin can also be used, but I found this stand via ebay with the [HASH]2 pin kit included for under $70 with 2 day shipping. Quick background, I've used (but not owned) pitbull stands, cheapy harbor freight rear stand, and the trackside rear stand which I currently own. I'm currently using this venom stand with the trackside rear stand. Comes packaged pretty good, here's a shot of it before assembly. Assembly is easy, I didn't use instructions or anything as it's pretty obvious where things should go. Construction is solid. Pit bull stands obviously offer top shelf construction, but these venom stands are no slouch and I have no worries about its structural integrity. Here's the 21mm pin ([HASH]2 pin kit) Here's the clearance under the headlight bracket when mounted. It's JUST fits, but fits nonetheless and it's solid. Overall I'm very happy with the stand, it's use and construction. It's sturdy when mounted in conjunction with a solid rear stand. Again, getting pin kit [HASH]2 or the pitbull [HASH]33 will fit the opening for our lower triple trees. Do you happen to have the retail link to buy one ? Thanks! Yamaha MT-10 ForumYamaha Tracer 900 Forum Yamaha Ténéré 700 Forum Link to comment Share on other sites More sharing options...
jmacas87 Posted February 2, 2017 Author Share Posted February 2, 2017 Here's a quick review of the venom front triple tree stand with the [HASH]2 pin kit. I know others use this stand, but to make it easy for future readers I wanted to re-post here so people know that it does indeed work. (With the proper pin) The [HASH]2 pin kit includes a 21mm pin that can be used with the FZ07. A pitbull [HASH]33 pin can also be used, but I found this stand via ebay with the [HASH]2 pin kit included for under $70 with 2 day shipping. Quick background, I've used (but not owned) pitbull stands, cheapy harbor freight rear stand, and the trackside rear stand which I currently own. I'm currently using this venom stand with the trackside rear stand. Comes packaged pretty good, here's a shot of it before assembly. Assembly is easy, I didn't use instructions or anything as it's pretty obvious where things should go. Construction is solid. Pit bull stands obviously offer top shelf construction, but these venom stands are no slouch and I have no worries about its structural integrity. Here's the 21mm pin ([HASH]2 pin kit) Here's the clearance under the headlight bracket when mounted. It's JUST fits, but fits nonetheless and it's solid. Overall I'm very happy with the stand, it's use and construction. It's sturdy when mounted in conjunction with a solid rear stand. Again, getting pin kit [HASH]2 or the pitbull [HASH]33 will fit the opening for our lower triple trees. Do you happen to have the retail link to buy one ? Thanks! Here's an official link of the seller https://www.kapscomoto.com/product_p/smi3010_smi3020-u-p2.htm ....... hint hint* much cheaper from the same seller on their amazon/ebay stores Link to comment Share on other sites More sharing options...
danfz07 Posted February 2, 2017 Share Posted February 2, 2017 I have the venom stands so I may be checking this out. Can you just buy the triple tree portion and add it to your existing stand? Link to comment Share on other sites More sharing options...
jmacas87 Posted February 3, 2017 Author Share Posted February 3, 2017 I have the venom stands so I may be checking this out. Can you just buy the triple tree portion and add it to your existing stand? yeah, but unfortunately almost as much as buying a new stand :-S https://www.amazon.com/Venom-Motorcycle-Triple-Headlift-Attachment/dp/B00AV8HR2U Link to comment Share on other sites More sharing options...
danfz07 Posted February 3, 2017 Share Posted February 3, 2017 I have the venom stands so I may be checking this out. Can you just buy the triple tree portion and add it to your existing stand? yeah, but unfortunately almost as much as buying a new stand :-S https://www.amazon.com/Venom-Motorcycle-Triple-Headlift-Attachment/dp/B00AV8HR2U Ouch!!!. I spent almost that much for a front and rear stand!! Think I may lift the front from the bottom of the forks for a bit longer. LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.