Jump to content
The MT-07 Forum

Check front brake line


Beemer

Recommended Posts

I just posted about a set of bar risers that didn't work because the cables/lines weren't long enough but in the process of trying to put the risers on I found that my front brake line had been pinched off, slightly. I remember thinking awhile back that my pads must be fading some, the front brake feels weaker, mushier. After loosening up the line my front brakes feel strong and stiff, like new so something good came out of a no good new part, yay! My point, if your front brake feels weak you may want to check the line to make sure it's not pinched off like mine was. Stay frosty! 👁️

Beemer

Link to comment
Share on other sites

My fronts feel like that. I figured they are just worn. I am planning on changing them out with the next set of tires.  I was going to replace them with the last set of tires but they werent even half worn (horay for engine braking!), but since they feel quite faded.  Figured is was just time with 26,xxx miles on the odo.

 

Now Ima check the front lines like I probably should have done some time ago,...

 

Thanks for the smack to the back of the head @Beemer!  

 

2cc59346c83f319a03c137e515213e19--danger

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.